Bleeding Brake System EFS005SK
CAUTION:
l While bleeding, pay attention to master cylinder fluid level.
l Before working, disconnect electrical connectors of ABS actuator and electric unit (control unit)
or the battery cable from the negative terminal.
LHD MODEL
1. Connect a vinyl tube to the rear right bleed valve.
2. Fully depress brake pedal 4 to 5 times.
3. With brake pedal depressed, loosen bleed valve to let the air out, and then tighten it immediately.
4. Repeat steps 3, 4 until no more air comes out.
5. Tighten bleed valve to specified torque. Refer to BR-24, "Components" (front disc brake), BR-30, "Components"
(rear disc brake).
6. From the steps 1 to 5 below, with master cylinder reservoir tank filled at least half way, bleed air from the
front left, rear left, and front right brake, in that order.